This is an old revision of the document!
Table of Contents
Oscilloscope for Linux
Software
XOscope
Download xoscope-2.2.tar.gz from:
https://sourceforge.net/projects/xoscope/
$ tar -xvf xoscope-2.2.tar.gz $ cd xoscope-2.2cd
one has to fix the package (at least for Arch Linux), remove the line 37 from display.c. Open:
$ nano display.c
and remove:
void *font;
Install the package:
$ ./configure $ make $ sudo make install
MicOscope
Download micoscope-linux-1.0.tar.gz from:
https://sourceforge.net/projects/micoscope/
Unpack it and run it:
$ tar -xvf micoscope-linux-1.0.tar.gz $ cd micoscope-linux-1.0/MicOscope/ $ ./MicOscope
Hardware
Use a cheap USB Soundcard.
Or build a protection circuit like that one:
[[http://xoscope.sourceforge.net/hardware/hardware.html
One can use a 1N4148 diode instead of 1N914 diode.