Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
raspberry:autostart_desktop [2020/02/11 22:15]
admin created 		— (current)
Line 1: Line 1:
-===== Autostart with a Desktop ===== 
  
-Sometimes one needs the X Windows system to run a Pure Data patch on a Raspberry Pi. This is the workaround for an autostart of a PD patch after booting in the desktop. 
- 
-==== Make a Autostart File ==== 
- 
-Make the folder and the file for the autostart:\\ 
-    $ mkdir /home/pi/.config/autostart 
-    $ nano /home/pi/.config/autostart/my_pd_autostart.desktop 
-Type in the following lines:\\ 
-    [Desktop Entry] 
-    Type=Application 
-    Comment=start a PD-patch 
-    Name=PD patch 
-    Exec=pd /home/pi/PD-sketchbook/my_pd_file.pd 
-Save it with ctrl+o, then hit return and then ctrl+x.\\ 
- 
-==== Run the Raspberry Pi Headless ==== 
- 
-To start the desktop even no monitor is connected one has to do some changes.\\ 
-In…\\ 
-    $ sudo nano /boot/config.txt 
-Uncomment the following line:\\ 
-    # uncomment if hdmi display is not detected and composite is being output 
-    hdmi_force_hotplug=1 
-Save it with ctrl+o, then hit return and then ctrl+x.\\ 
- 
----- 
-==== Links ==== 
- 
-[[http://raspberry.tips/raspberrypi-einsteiger/raspberry-pi-autostart-von-skripten-und-programmen-einrichten]]\\ 
-[[https://learn.sparkfun.com/tutorials/how-to-run-a-raspberry-pi-program-on-startup#method-2-autostart]]\\ 
- 
- 
-----