===== VGA Board =====

[[https://learn.pi-supply.com/make/gert-vga-666-assembly-tips-and-gotchas/]]\\

On the command edit:\\
   $ sudo nano /boot/config.txt

Then add these lines at the bottom of the file:\\
   dtoverlay=vga666
   enable_dpi_lcd=1
   display_default_lcd=1

You also need to specify your screen resolution. After the lines you added above you will also have to then add one of the following configurations:\\
   #For 1920x1080 60Hz
   dpi_group=2
   dpi_mode=82
   
   #For 1280x1024 60Hz
   dpi_group=2
   dpi_mode=35
   
   #For 1024x768 60Hz
   dpi_group=2
   dpi_mode=16
    
   #For 800x600 60Hz
   dpi_group=2
   dpi_mode=9

Xou will need SPI and I2C to be disabled. Verify that by looking in the config.txt for the following two lines:\\
   dtparam=spi=off
   dtparam=i2c_arm=off 

----